Now only heating up determines cycle time.
Special-machine manufacturer Krott + Heuter has developed a new Type ZKSTA series of machines for hot upsetting of fastener (screw and bolt) heads and pins. The new machine has now passed its trials at a renowned manufacturer of punches and ejector pins. The centrepiece of these machines is a specially developed three-sector star die, which chronologically separates the “Insertion”, “Heating-up”, “Heading”, “Cooling” and “Discharge” operations from each other. This enables the machine to reduce heading cycle times by up to 30 per cent.
Up to now, it has been customary to use dies with two opposing mountings for hot heading of fasteners (screws/bolts), ejector pins for mould-making and perforating pins and needles. A new pin was inserted in the upper position while the pin in the lower position was being headed. The die was then turned through 180°, the pin cooled down and was then discharged. Insertion, cooling and discharge all took place in the same mounting, with the result that the sum of these operations determined cycle time. The consequence: it was necessary to wait for sufficient cooling, particularly in the case of thick material, despite the fact that heating-up and heading had long since been completed.
The ZKSTA series of automatic heading machines feature a newly developed star die with three separately cooled mountings arranged in a star configuration. While a finished pin is being removed from the first position and a new one inserted, another pin is being inductively heated and upset simultaneously in the second position. The pin cools in the third position. The star rotates by 120° to the next position after each cycle. The process that determines cycle-time is now heating up, and there is no longer any need to wait through the unproductive cooling phase.
Users report that they have been able to boost the output of their production lines by up to 30 percent thanks to the separation of heading, cooling and discharge.
The technology in detail
The machine described above upsets pins of diameters between 2 and 8 mm with an upsetting force of up to 200 kN, although significantly larger dimensions and upsetting forces, of up to 1,000 kN, are also possible. The machine’s high level of precision also permits the production of fastener heads with special geometries, such as types bevelled on one side, for example, or pins featuring various special head shapes. The automated machine can also be used for cold upsetting of softer materials, such as structural steel, aluminium or brass.
The pins are automatically inserted, measured and upset to the precise final head dimension by means of a servo-controlled stop plate, with the result that every individual head is completely filled.
The servo-hydraulically actuated upsetting cylinder can be operated power-controlled or deformation-controlled. Unlike conventional systems, which require large quantities of hydraulic fluid, the new system does not include any external fluid supply. There is no separate tank for hydraulic fluid, and the machine therefore has a footprint of only around 1.0 x 3.0 m.
These heading units have maintenance intervals of around 20,000 operating hours. Technically, they are automatic upsetting machines and are thus not subject to European mechanical and hydraulic press legislation.
Krott + Heuter GmbH
Peter Krott and Ralf Heuter founded the company in 2002. Both studied Engineering Design at the FH Aachen University of Applied Sciences and gathered wide-ranging experience in the production of special machines with renowned manufacturing companies.
The fundamental philosophy which they continue to follow today is of developing and constructing machines for optimised industrial production to meet customers’ individual requirements.
The Krott and Heuter concept is that of looking beyond the existing boundaries in close harmony with the client, departing from well-trodden paths, and making practical reality of innovations. In this way, they have proven in a large range of projects that their machines significantly accelerate their customers’ production processes and boost their efficiency.
The majority of the components for these machines are supplied by production partners from a smoothly functioning network within the Technology Region Aachen.
Die Bildrechte liegen bei dem Verfasser der Mitteilung.